Sistemas de pulido para restauraciones cerámicas. Revisión de la literatura
DOI:
https://doi.org/10.20453/reh.v33i1.4437Keywords:
Cerámica, pulido dental, restauración dental permanente (DeCS)Abstract
El pulido es un paso de suma importancia en el flujo de trabajo de las restauraciones cerámicas, después de realizado un ajuste con puntas o piedras diamantadas, ya que disminuye la rugosidad de las superficies tratadas. Esto repercute positivamente en las propiedades mecánicas y ópticas del material. Sin embargo, la poca literatura disponible acerca de este procedimiento hace que sea pasado por alto. Debido a esto, el presente articulo tuvo como objetivo realizar una revisión bibliográfica sobre los diferentes protocolos de pulido para las diversas restauraciones cerámicas de mayor uso: Feldespática, disilicato de litio y zirconia en sus diferentes presentaciones. Se describen aspectos relevantes sobre el pulido mecánico, la rugosidad superficial y los sistemas de pulido actuales para cerámicas.
Downloads
References
REFERENCIAS
Li RW, Chow TW, Matinlinna JP. Ceramic dental biomaterials and CAD/CAM technology: state of the art. J Prosthodont Res. 2014;58(4):208-216.
Silva TM, Salvia AC, Carvalho RF, Pagani C, Rocha DM, Silva EG. Polishing for glass ceramics: which protocol? J Prosthodont Res. 2014;58(3):160-70.
Pott PC, Hoffmann JP, Stiesch M, Eisenburger M. Polish of interface areas between zirconia, silicate-ceramic, and composite with diamond-containing systems. J Adv Prosthodont. 2018;10(4):315-320.
Kurt M, Bankoğlu Güngör M, Karakoca Nemli S, Turhan Bal B. Effects of glazing methods on the optical and surface properties of silicate ceramics. J Prosthodont Res. 2020;64(2):202-209.
Fu L, Engqvist H, Xia W. Glass-Ceramics in Dentistry: A Review. Materials (Basel). 2020;13(5):1049.
Ahmed WM, Troczynski T, McCullagh AP, Wyatt CCL, Carvalho RM. The influence of altering sintering protocols on the optical and mechanical properties of zirconia: A review. J Esthet Restor Dent. 2019;31(5):423-430.
Rani V, Mittal S, Sukhija U. An In vitro Evaluation to Compare the Surface Roughness of Glazed, Reglazed and Chair Side Polished Surfaces of Dental Porcelain. Contemp Clin Dent. 2021;12(2):164-168.
Vega J. Cerámica dental. En: Toledano M. Arte y ciencia de los materiales odontológicos. Michigan: Ediciones Avances Médico-Dentales; 2003. p. 283-296.
Doi T, Ohnishi O, Uhlmann E, Dethlefs A. Lapping and Polishing. En: Marinescu I, Doi T, Uhlmann E. Handbook of Ceramics Grinding and Polishing. Oxford: Elsevier; 2015. p. 263-325
Mohammadibassir M, Rezvani MB, Golzari H, Moravej Salehi E, Fahimi MA, Kharazi Fard MJ. Effect of Two Polishing Systems on Surface Roughness, Topography, and Flexural Strength of a Monolithic Lithium Disilicate Ceramic. J Prosthodont. 2019(1):172-180.
Gaonkar SH, Aras MA, Chitre V. An in vitro study to compare the surface roughness of glazed and chairside polished dental monolithic zirconia using two polishing systems. J Indian Prosthodont Soc. 2020;20(2):186-192.
Rashid H. The effect of surface roughness on ceramics used in dentistry: A review of literature. Eur J Dent. 2014;8(4):571-579.
Çakmak G, Subaşı MG, Sert M, Yilmaz B. Effect of surface treatments on wear and surface properties of different CAD-CAM materials and their enamel antagonists. J Prosthet Dent. 2021:S0022-3913(21)00340-1.
Selvaraj U, Koli DK, Jain V, Nanda A. Evaluation of the wear of glazed and polished zirconia crowns and the opposing natural teeth: A clinical pilot study. J Prosthet Dent. 2021 Jul;126(1):52-57.
Tachibana K, Atsuta I, Tsukiyama Y, Kuwatsuru R, Morita T, Yoshimatsu H, Matsushita Y, Narimatsu I, Ayukawa Y, Sawae Y, Koyano K. The need for polishing and occlusal adjustment of zirconia prostheses for wear on antagonist teeth. Dent Mater J. 2021;40(3):650-656.
Kanat-Ertürk B. Color Stability of CAD/CAM Ceramics Prepared with Different Surface Finishing Procedures. J Prosthodont. 2020;29(2):166-172.
Contreras L, Dal Piva A, Ribeiro FC, Anami LC, Camargo S, Jorge A, Bottino MA. Effects of Manufacturing and Finishing Techniques of Feldspathic Ceramics on Surface Topography, Biofilm Formation, and Cell Viability for Human Gingival Fibroblasts. Oper Dent. 2018;43(6):593-601.
Scherrer D, Bragger U, Ferrari M, Mocker A, Joda T. In-vitro polishing of CAD/CAM ceramic restorations: An evaluation with SEM and confocal profilometry. J Mech Behav Biomed Mater. 2020;107:103761.
Silva TM, Salvia AC, Carvalho RF, Silva EG, Pagani C. Effects of Different Polishing Protocols on Lithium Disilicate Ceramics. Braz Dent J. 2015;26(5):478-483.
Kalia P, Nair KC, Jaiswal D, Tikmani C, Banerjee D, Bera R. A comparative study on the effect of polishing systems on the color and surface texture of different porcelain systems-feldspathic, pressable, and computer-aided design/computer-aided manufacturing. J Indian Prosthodont Soc. 2021;21(2):173-179.
Downloads
Published
How to Cite
Issue
Section
License
The authors retain the copyright and cede to the journal the right of first publication, with the work registered with the Creative Commons License, which allows third parties to use what is published as long as they mention the authorship of the work, and to the first publication in this journal.
